0.01 ~ 100uH Ferrite Wire Wound Inductor TDK NLV25T High Current For Standard Circuits

TDK NLV25T Series Chip / SMD Ferrite Wire Wound Inductor For Standard Circuits

SPECIFICATIONS:

* Inductance range: 0.01 ~ 100uH

* Size: 2520 / (1008)

* Rated Current : 60 ~ 530mA(Max)

* DCR : 0.26 ~21 Ω (Max)

* Test frequency: 0.796 ~ 100M Hz

* Operating temperature range :–40 ~ +105°C
* Storage temperature range:    –40 ~ +105°C

* Minature size, suitable for SMT;
* Using terminal electrode structure to restrain the
   parasitic component effect quite caused by lead;
* Low DC resistance , high current and high inductance;
* Execellent in solderability and heat resistance.

* The product has good heat durability that withstands lead-free
   compatible reflow soldering conditions.
* Lead-free material is used for the plating on the terminal
* The electrical characteristics, reliability, shape and pad shape
   are the same as the previous NL series.
* The product uses metal terminals, which realize excellent
   connection reliability.
*  Highly heat resistant thermoplastic resin is used to form the
    exterior package.
*  From 0.01μH to 100μH, all of the products in the E-12 series are
   J(±5%) tolerance products.
*  This product is in compliance with the RoHS Directive. Other
    products with specifications that do not include exemption
    regulations are also available.

APPLICATIONS:
*  Audio-visual equipment including TVs, VCRs and digital cameras.
*  Electronic equipment used in communication infrastructures
   including xDSL and mobile base stations.
*  Electronic equipment used in onboard automobile equipment
   including car audio and ECU systems.
*  Other electronic equipment including HDDs and ODDs.

SPECIFICATIONS:

* Operating temperature range : –40 to +105°C
* Storage temperature range –40 to +105°C

IRON SOLDERING:

Tip temperature 300 to 350°C
Heating time 3 secconds/soldering
Soldering rod specifications Output: 30W Tip diameter: 1mm

• Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.

DIMENSIONS : (unit: mm/inch)

Contact Details:
Contact: Angel Sun
Tel: +86-13528847020
Email: Admin@winsunhk.cn
Skype: Angelsun618
Whatsapp: 13528847020
Wechat: 13528847020
QQ: 553695308

wire wound chip inductor

wire wound power inductor

0.01 ~ 100uH Ferrite Wire Wound Inductor TDK NLV25T High Current For Standard Circuits Images